Why Remote remote control does not work? But when mouse plugged into the mouse controls it?
The error when using CCTV recorder ( DVR ) and how to fix it
1 ) Why DVR camera recorder can not recognize the hard drive ?
- Causes :
+ Current HDD ( hard drives ) or data cable connection is not possible.
- How to fix it:
+ Check the power cable and data cable . And format the hard drive .
+ Turn off the power to turn on the recorder .
2 ) Why Remote remote control does not work ? But when mouse plugged into the mouse controls it?
- Causes :
+ Install battery or battery not true .
+ Remote is in " OFF " .
- How to fix it:
+ Check the battery .
+ Open the System Menu , open the " ON " mode to Remote or mouse attached , Right click and looked right corner icon Remote screen viewing modes are blue or red . If red is being Remote mode " OFF " and you click on the left to turn green is used.
3 ) We can remove a portion of the video file on your hard drive does not ?
- No , we can not perform this operation . For reasons of safety , we can not erase a portion of the video file on your hard drive . If you want to delete them , you can reformat the hard drive .
4 ) Why alarm mounted on the camera recorder does not work ?
- Causes :
+ In the calendar , you select the type of alarm is not correct .
+ Faulty cable connection .
+ Input signals are false alarms .
+ Do not switch to record mode .
- How to fix it:
+ Choose the type of alarm is " sensor alarm " , and check the cable signal simultaneously to switch recording modes .
5 ) Why can not find the video file in search menu after recording ?
- Causes :
+ Beat improper scheduling .
+ Users switch to record mode .
+ The search time period not true .
+ Connectivity Cable HDD ( hard drive ) is not good .
+ The system date and time are not correct .
+ Format system has been changed .
- How to fix it:
+ On the schedule , you select the start time is set out in paragraph 1 " 00:00 24:00 " .
Switch + recording mode .
+ Choose the right time record search , check the HDD cable connection , check the system date and time .
6 ) Why recorder camera DVR video output when not plugged into the camera ?
- Causes :
+ Jack BNC connector no good .
+ Motherboard socket on the camera recorder fails
- How to fix it:
+ Check the cable and BNC jack .
+ Move the camera position to another channel was plugged up the camera
7 ) Can not control the camera or video recorder is not manipulating the joystick ?
- Causes :
+ Recorder locked .
- How to fix it:
Plug -click , right click the mouse and icons appear right corner of the screen. Left-click on the lock icon , the following window will appear asking you to enter " Username and Password " . You must be logged in to manage high . By default the first record is : " Username : admin , Password : 000000 ." Or you can use the Remote , click on the " Lock " window will appear and you can log like tren.Tuy each manufacturer that have the username and password are different.
8 ) Can not view camera video recorder via LAN ?
- Causes :
+ Jack contact between the network and the network port of the first record is not good .
+ The IP address of the recorder does not coincide with the network layer address of the modem or Route .
+ Username and Pass is not true.
- How to fix it:
Check back Jack + networks .
+ In the first menu changes recorded IP addresses to coincide with the first record of your modem or network layer route .
+ Check your username and password .
+ Add " DVR port" after logging IP addresses .
9 ) Why no video output is HDMI / VGA / YPbPr and no cursor appears on the screen ?
- Causes :
+ Select the video output mode and mouse mode is not displayed correctly .
- How to fix it:
+ On the Menu system , adjust the video output mode and mouse mode display to match
10 ) A note with the first fault record
- Check the source of the first record (check all parameters of the source ) Restart the recorder - Restore the original settings of the recorder
TEXT_OTHER_TAILIEU