Mobile industry is enjoying a rapid boom, the competition between the device seems to be getting...

Mobile industry is enjoying a rapid boom, the competition between the device seems to be getting tougher. The design has continuously improved, innovative product design so that "the minions" of them to become more complete. However, it is difficult to avoid all the upgrades that are sometimes counter-productive.

Here let us consider 10 designs "stupid" that users have the technology or the most complaints. A. Protective cap for connector If you work in dusty environment, wet or constantly engaged, the outdoor explorer equipped with a lid for the connector is sorely needed. Usually cover prevents dirt or water entered your device. But that's just the script using a fraction of users.

With the majority of users often work in very clean environments such as schools, hospitals, office or even at home, cover design protects the connector has become superfluous, unless that cover the SIM card socket or socket connection important. Two. Assuming the power button is hard to find manufacturers and mobile if your design makes users take more than 5 seconds to find the power button on the laptop or other device utility for your condolences have failed. Currently many notebooks put the power button on the front. This design does not cause any trouble if you use laptop on the table but when placed on the thigh, the ability to accidentally press this button is very high. A typical example for this inconvenience Xyboard 02.08 Droid tablet as Motorola have set the power button located on the underside of the machine equipment.

This is also a point of note for smartphone manufacturers with own big screen. Power button should be placed at the side instead of at the top of the machine as this smartphone, users will not have long finger to unlock the phone. 3. Easy fingerprint Another drawback of the tablet, laptop or cell phone that is very easy to fingerprints on the screen coating or during use. Shell design with glossy plastic material is the main reason for this result. Design trends for metal surfaces seems better but still not optimal because they do make the device's weight increases.

In addition, some users also or sympathetic to the monolithic design of plastic appeared recently on some mobile devices. Due to be manipulated by the new material should be designed not only resistant to fingerprints, but also ensures fashion. These include products that are typical Nokia design Lumia 900 policarbonat plastics feel very happy holding hands as well as create a luxurious look needed with a superior product. 4. No physical buttons Consumers often feel quite uncomfortable when the physical buttons on Android or Windows Mobile phone to be replaced by touch sensitive buttons. When the user touches the touch buttons below the backlight is activated. Many customers have expressed dissatisfaction by clicking sensation and sometimes not so easy to slide switches.

Five. Easy swing hinges will be no problem if you do not often play on my laptop. Unfortunately a few Ultrabooks with ultra slim design when opened on the many causes for the hinge is easy to be swayed. Worse, it can make the hinges come loose when users open or close the hands of the machine too much. Both the 2 line equipment HP Envy 4t and 6Z are making these errors in the design.

 6. Camera position misplaced Typically, a tablet will be designed with manufacturer logo located at the bottom of the screen edges and a camera placed at the left edge of the screen. This is again a problem in the design and Lenovo IdeaPad has molded the S2109 with such designs. This will cause much inconvenience, if the user wants to use the front camera for video calls, then they will be very easy to hand obscured tablet camera when held vertically. Tablet Archos 70 also suffering from same design fault. If users want to use the camera before turning the machine will probably have to use the other side.

7. Charger design is not reasonable Users often complained when the first design of the laptop cord is too large. Every socket usually occupies the area and no room for any other device. For example, Asus UX series VD 32 is equipped with a power adapter looks very rectangular "monumental" and take up valuable space. In addition, a further restriction on the design that is too short cord makes the user will need to sit in the socket to use when your battery is running low.

There are so many tablets or smartphone comes with the charger cord so short like that. The scenario would be you're lying on the seat and plug charger plugged in behind the iPad. So it's easy to accidentally pull the plug when using iPad. 8. Speaker placement underinvestment users are probably very disappointed when the manufacturers put the laptop in position behind the speaker. This makes the user accidentally cover the vents away from the speakers affect sound quality. This can be considered as one designed "ungainly". It is best for ultra-thin devices, manufacturers should consider putting in place the speakers on the front or bottom of the keyboard it would be better.

Meanwhile, there are many speakers tablet placed in position at the edge or back edge of the device, this can easily cause the fingers to accidentally bit stereo speakers. A good design for the speaker placement to mention Samsung Galaxy Tab 2 10.1, the Samsung tablet is designed with two speakers mounted on either side in front. This is one of the speaker design is most appropriate setting. 9. Function keys inconvenient Many people have a habit of using a laptop with a finger. Perhaps this way, they can hardly be used as function keys are pretty much own the device function button is hidden by a combination of two or three buttons. It is annoying if the right combination of keys to operate the basic functions such as increasing the volume or brightness of the screen.

It seems that Apple has been followed properly for a long time, but many other computer manufacturers now realize that. HP or Dell are using the function keys operate independently. Acer, ASUS, Sony and Lenovo will probably need to learn much from such a design. 10. Design metalized Consumers like to buy cheap products but designed to look beautiful and attractive while manufacturers always want to sell more goods, but with lower production costs to make a lot profit. Supply to meet demand so sometimes they fool their customers with devices that have plastic shells, but it looks like is made of metal.

For example, LG Viper is back is made of a layer of black plastic, but painted metal cover as a senior. The market has many tables and laptop computers are doing so. A few notebooks with external caps are plated only a thin metal layer to fool the user's vision. Wear "clothing" fake metal make people feel like the vendors are "hung the goat and sell dog meat." Thaeo Genk / Gizmodo